Rotec Radial Engines R2800 R3600. Rotec TBI. Rotec LCH. Rotec Reliant plane

Rotec R2800 Powered Full Scale Sopwith Pup
Owner: Glenn Burt
Status: Flying Since July 2011

Refresh < On Entry PLEASE Click to refresh page!


Rotec
Aerosport Pty Ltd
Victoria
Australia

 

Glenn Burt Sopwith Pup Project:

The photo opposite shows Glen with his completed Airdrome Aeroplanes Sopwith Pup which took to the skies July 2011. .

The Sopwith Pup (Full Scale) Kit was purchased from Airdrome Aeroplanes. Anyone interested in such a kit should contact Robert Baslee. For more information please visit Airdrome's web site: http://www.airdromeaeroplanes.com/index.html

The Sopwith Pup was a British single seater biplane fighter aircraft built by the Sopwith Aviation Company. It entered service with the Royal Flying Corps and the Royal Naval Air Service in the autumn of 1916. With pleasant flying characteristics and good manoeuvrability, the aircraft proved very successful. The Pup's docile flying characteristics also made it ideal for use in aircraft carrier deck landing and takeoff experiments.

The kit you get from Airdrome Aeroplanes is complete in every way up to your final colour coat. The kit and the excellent builder support you will receive from Airdrome Aeroplanes will get you in the air in a fraction of the time needed to build other WW-1 replica aircraft. No hunting for parts or waiting for shipments. Airdrome Aeroplanes' kits have it all!! All nuts, bolts, rivets, gusset plates, machined plugs, tubing and any other hardware are included in the kits. Airdrome as a Rotec agent will source your Radial radial and provide full support towards flight behind the Rotec.

You can get much more information about this kit... just give Airdrome Aeroplanes a call ...


On subsequent visits please refresh this page using either F5 key or your browser's Refresh button

Latest Updates are at the top.

Do you want to start at the beginning of this project? In which case Click to Go Down to the start...

as usual click to on the bordered thumb-nails to enlarge ...

VIDEOS
Rotec Radial R2800 1st Start on Pup
Rotec Radial R2800 powered Pup flying
Rotec Radial R2800 powered Pup First Flight
Rotec R2800 1st Start on Sopwith Pup
R2800 Powered Sopwith Pup Engine Start
Rotec R2800 on Sopwith Pup 1st Flight

Glenn Burt's Full Scale Sopwith Pup Completed and Flying Since July 2011
Pup Flying using RotecRadial R2800 power
Pup Flying using Rotec Radial R2800 power
Rotec Radaial R2800 Powered Pup Flying
Rotec R2800 Powered Pup Completed
Glen suits-up
... Takes off
... Up-up 'n away
... Come in and lands.
RotecRadial Powered Pup Completed
Rotec R2800 Powered Pup Completed
Magnificently Finished by Glenn
Compliance Paperwork in Hand
Displaying the Rotec Radial ...

 

Back to the top

 

Phone +61 3 9587 9530. - .EmailAdmin@RotecAerosport.com  - Tech Support at Technical@RotecAerosport.com.
Please feel free to send comments and report broken links to roteceng@optusnet.com.au